Ladder Safety & Fall Protection at Workplace

Ladder is the most important height safety equipment not only used at construction sites, but also useful for simple house repair works. Ladders are very dangerous if not used properly. These are available in different types of materials and should be chosen according to the nature of work. But it is necessary to learn ladder safety tips to avoid any accident at the workplace.

Aluminum is one of the most common materials for manufacturing ladders. It is light, strong and easily manipulated for manufacture. Aluminum ladders also don’t chip or crack when subjected to impact. This instrument is also available in fiberglass material. It is far more brittle though, and can crack if impacted but it doesn't conduct electricity so is often used around electricity. Ladders are also available of wood. Wood is a traditional material and still useful for ladders. Timber ladders are often made of combined hard and soft wood for strength and rigidity. 

If you are using portable ladder then it may fold beneath you. However, the result would be the same and you will simply fall down on the ground. To achieve ladder safety, position the ladder correctly. If you are a worker and use ladder for height works, you should be trained with ladder safety training. With help of the tips the incidents of accidents can be minimized. The simple ladder safety tips are as follows:

·         The first thing to consider is that you should inspect the ladder before placing your first step. This examination of ladder is very important. Make sure that the ladder is free from any liquid that may slip you. 

·         Check for 'loose or bent rungs' of your little giant ladder.

·         Set the base of ladder one foot away from the wall for every four feet of ladder height.

·         Avoid pushing or pulling stepladders from the side. Repeated sideways movement can make ladders wobbly since they are weaker or less stable in those directions.

·         The next thing to assess is the structural integrity of the ladder. Ensure there are no bends, buckling or misshapen rungs. Then check for any cracks or splinters in the metal. 

·         Face the ladder when you climb up or down. Hold on to the side rails with both hands. Use a rope to lift heavier equipments.

You can never be too safe when working at heights. Many people fall and are injured each year, and most could be avoided if they followed some simple safety basics. Hence it is necessary to earn height safety training.

Fall Protection Safety Tips for Workers

Construction works are no easy for all people. Safety precautions should be taken before starting any work. Construction safety related to fall protection includes an evaluation of the correct methods of access to the heights where the work needs to be done, safety precautions being put in place and followed at all times, and regularly clearing the construction work area of all debris.

Fall protection equipments are available in different forms and materials. These equipment s are beneficial for numbers of occupations, namely construction and other jobs that work high in the air on regular basis. This protective device has known to save lives and prevent serious injury. A fall safety harness that falls in the second class involves a chest device that secures to the entire upper body. It is usually used in cases where the worker is going to be lowered into a building or other enclosure and then be removed at a low speed.  A safety harness is an approved design of straps which may be secured about the employee's body in a manner to distribute the fall-arrest forces over at least the thighs, pelvis, waist, chest, and shoulders, with a means for attaching it to other components of a personal fall-arrest system. In order to ensure your fall protection equipment, such as safety harnesses, is safe and secure, retains its quality, and is operating to its maximum potential, it's important to follow a few storage and maintenance guidelines. Ladder training is also necessary for people working at height.

There are numbers of companies that offer fall protection equipment, making working on heights safe and easier to do. Some equipment is used to extend safety. These include Guardrails that can provide people with permanent fall protection. If you get these guardrails you will not even have to make use of personal fall guard as the entire roof is made perfectly secure and accessible. Other than guardrails, roofs can be protected using steel cable track among other solutions. Safety companies also offer mobile fall guard such as Mobile anchor points, Lifelines, Positioning Lines, fall arrest devices, Safety hooks, Pulleys and more. 

The best way to find a suitable service is to conduct some research online. You can use your favorite search engines and look for companies that offer fall guard equipment. Remember to check out their general reputation and their success stories. By implementing fall protection and working toward fall prevention, overall onsite construction safety can be greatly enhanced